NestorSprings

Everything starts from a spring

The basic element of the unit is a bonnell which is a single spring. Our springs are made of high carbon wire with a diameter of 2.2 or 2.4 mm.

nestorsprings_bonel_img

Normally, we make bonnells in combinations of the following parameters:

height from 70 up to 150 mm,
diameters: 76, 78, 82, 85, 87, 90 mm,
in the 4- or 5- coil systems.

From the spring to the unit

Bonnell type units are made from bonnells connected with a spiral known as a helical. They are the most commonly used spring systems in classic upholstered furniture and mattresses.

nestorsprings_formatka_img

Bonnell type units used in the manufacture of mattresses are usually manufactured from:

wire with a diameter of 2.2 mm.
in standard heights of 110 up to 140 mm,
 in the 4- or 5- coil systems.

Units for upholstered furniture are generally produced from:

wire with a diameter of 2.2 or 2.4 mm.
in standard heights of 70 up to 110 mm,
 in the 4-coil systems.

nestorsprings_ramka_img
All units produced by our company can have a steel frame on one or both sides. The frame increasesstability of units.

Dimensions of bonnell type units

We believe that with a wide range of bonnells produced by NESTOR SPRINGS, we can create units
with dimensions and parameters that would meet clients’ individual needs. Dimensions of bonnell type units are present in detail in the dimension tables. If these parameters do not meet your expectations, we encourage you to read the offer for the minibonnell units or to inquire directly to our sales department.